Download VectorPro

Important
Please review the software release notes before upgrading VectorPro and please contact our technical support team for assistance with software and firmware upgrades. Failure to apply the updates correctly could irreversibly damage your test stand or loadcell.

Important release notes for VectorPro

• Upgrades to VectorPro v9.2 are only recommended from v6.1 (or newer).
• Firmware dependency
  • VectorPro v6.14 (or later) must be paired with firmware v3.1.4, following the introduction of 'Absolute Position' support.
  • VectorPro v8.3 must be paired with firmware v3.1.7 (or later), following the introduction of 'Move % of Absolute Position' operation and the 'User Defined ELS Load Limits' condition.
  • VectorPro v9.2 must be paired with firmware v3.2.2, following updates to firmware behaviours toward break detection, clearing of a predefined home position, and moving to a predefined home position.
• Upgrading your test stand firmware
  When upgrading a test stand to latest available firmware, please make sure it is supported and all precautions have been taken before upgrading the firmware, as well as the VectorPro software and database. Unsure if your stand supports the latest firmware? Please contact our technical support team or your authorised Mecmesin representative.
• Upgrading your ELS firmware
  Upgrading your test stand's firmware to v3.2.2 or later may also trigger an upgrade of the ELS firmware to a newer version
• Installer
  VectorPro installer is digitally signed by Mecmesin/PPT Group (including all EXE and DLL files)

Do I need VectorPro with or without SQL Server?

This depends on your data storage requirements. Your Mecmesin technical sales engineer will be able to advise you on which installer to select and if the bundled SQL server is appropriate based on your use and IT requirements.