OmniTest
A versatile and easy to use materials tester, the single and twin-column OmniTest is available in 5-50 kN capacities.
Controlled by VectorPro MT, Mecmesin's newly developed materials testing software designed for use in QC and R&D laboratories.
Filter by...
Guides
-
-
A Guide to Safe Use of Mecmesin Mains Powered Test Systems
-
Installing or Upgrading VectorPro Software
A Guide on Installing or Updating VectorPro software.
Manuals
-
Installation and Operation of Mecmesin Interlocked Machine Guarding
-
Mecmesin Long-Travel Extensometer User Manual
Mecmesin Long-Travel Extensometer User Manual
-
OmniTest 10/25/50 Twin Column Installation and Operation Manual
OmniTest 10/25/50 twin column test system user manual
-
OmniTest Single Column Test Systems User Manual
OmniTest Single Column Test Systems User Manual
-
VectorPro Operating Manual - All Tests Viewer and Results Viewer
All Tests Viewer and Results Viewer
-
VectorPro Operating Manual - Designing a Test (VectorPro MT only)
-
VectorPro Operating Manual - Designing a Test Lite Version
Designing a Test (VectorPro Lite Version)
-
VectorPro Operating Manual - Introduction and Initial Setup
Introduction and Initial Setup
-
VectorPro Operating Manual - Running a Test, Reporting and Exporting
Running a Test, Reporting and Exporting
-
VectorPro Operating Manual - System Deflection Compensation MT Systems Only
System Deflection Compensation (MT Systems Only)
-
VectorPro Operating Manual - Workspace and User Management
Workspace and User Management
Certificates
-
EC Declaration of Conformity, Mecmesin Touchscreen Controller
-
EC Declaration of Conformity, MLTE Long Travel Extensometer 700, 1000 and 1200
-
EC Declaration of Conformity, OmniTest 0.5, 1 and 2.5
-
EC Declaration of Conformity, OmniTest 10, 25 and 50
-
EC Declaration of Conformity, OmniTest 5 and OmniTest 7.5
-
EC Declaration of Conformity, OmniTest 5 and OmniTest 7.5 Standard Machine Guards
-
EC Declaration of Conformity, Single Column Standard Interlocked Guards