MultiTest
The MultiTest is a versatile tensile and compression tester controlled by software running on a PC (-i and -xt models) or as a motorised test stand (-dV model).
Available in a range of capacities as both single and twin-column from 0.5 kN right up to 50 kN, it is ideal for product testing applications according to your own test methods.
Filter by...
Guides
-
-
Sicherheitsanweisungen für netzbetriebene Mecmesin Prüfsysteme
-
A Guide to Safe Use of Mecmesin Mains Powered Test Systems
-
Connecting a MultiTest-dV to Windows - USB Driver update
This guide describes how to update the USB driver for dV stands in Windows OS
-
Connecting an AFG to a MultiTest-dV stand
This document explains how to configure an AFG to communicate with a MultiTest-dV test stand
-
Installing or Upgrading VectorPro Software
A Guide on Installing or Updating VectorPro software.
-
Microsoft Windows Embedded Standard 7 Licensing for Mecmesin-xt Systems
Manuals
-
Bedienungsanleitung zur Montage und Installation von Kraftprüfsystemen MultiTest-i und Vortex-i
-
Bedienungsanleitung zur Montage und Installation von Kraftprüfsystemen MultiTest–xt und Vortex-xt
-
Emperor™ Programmierung für Mecmesin Kraft- und Drehmomentprüfsysteme vom Typ -xt
-
Emperor™Software für Kraft-und Drehmomentprüfsysteme Bedienungsanleitung
-
MultiTest-d Motorisierte Prüfstände Zug- und Druck-Lösungen für Messaufgaben Handbuch
-
MultiTest-dV motorisierter Prüfstandfür Zug und Druck Bedienungsanleitung
-
VectorPro Lite für dV-Teststände und Instrumente Bedienungsanleitung
-
Assembly and Installation of MultiTest-i and Vortex-i System Test Stands
IMPORTANT -
Assembly and Installation of MultiTest-xt and Vortex-xt System Test Stands
-
Emperor™ Force and Torque Testing Software: Operator Manual
-
Emperor™ Programming for Mecmesin-xt Force and Torque Test Systems
-
Installation and Operation of Mecmesin Interlocked Machine Guarding
-
Mecmesin Long-Travel Extensometer User Manual
Mecmesin Long-Travel Extensometer User Manual
-
MultiTest-d Motorised Test Stands Operating Manual
-
MultiTest-dV Tension and Compression Test Stand Operating Manual
MultiTest-dV Tension and Compression Test Stand Operating Manual
-
VectorPro Lite for dV Test Stands and Instruments Operating Manual
-
VectorPro Operating Manual - Designing a Test (VectorPro MT only)
-
VectorPro Operating Manual - Designing a Test Lite Version
Designing a Test (VectorPro Lite Version)
Certificates
-
EG-Konformitatserklarung , MultiTest dV alle varianten inklusive dV(u), sensoren & standardschutzeinrichtung
-
EG-Konformitatserklarung, 2.5 Standardschutzeinrichtung, 0.5 Standardschutzeinrichtung und 1.0 Standardschutzeinrichtung
-
EG-Konformitatserklarung, MLTE Langweg Extensometer 700, 1000 and 1200
-
EG-Konformitatserklarung, MultiTest 0.5-i; 1-i; 2.5-i; 5-i; MultiTest 05.-xt; 1-xt; 2.5-xt; 5-xt; FPT-H1-i; FPT-H1-xt und Standardschutzeinrichtung
-
EG-Konformitatserklarung, MultiTest 10-i; 25-i; 50-i; MultiTest 10-xt; 25-xt; 50-xt und Standardschutzeinrichtung
-
EC Declaration of Conformity, MLTE Long Travel Extensometer 700, 1000 and 1200
-
EC Declaration of Conformity, MultiTest 0.5-i; 1-i; 2.5-i; 5-i; MultiTest 05.-xt; 1-xt; 2.5-xt; 5-xt; FPT-H1-i; FPT-H1-xt and Standard Guards
-
EC Declaration of Conformity, MultiTest 10-i; 25-i; 50-i; MultiTest 10-xt; 25-xt; 50-xt and Standard Guards
-
EC Declaration of Conformity, MultiTest dV all variants inc dV(u), sensor and guard
-
EC Declaration of Conformity, Single Column Standard Interlocked Guards
-
EC Declaration of Conformity, Single Column Standard Interlocked Guards
FAQs
-
1. Allowing limited access although motorised test stand not detected (COM port)
-
2. Allowing limited access although motorised test stand not detected (USB cable driver)
-
Am I able to use any other software to communicate with my MultiTest-i or xt stand?
-
Can I get the dimensions of the anvil plate used on MultiTest and OmniTest stands ?
-
How do I Check or select a comm port in Emperor-xt?
-
I have a Column missing in my Emperor Report?
-
Overload detected
-
Overtravel Switch encountered
-
Why are some of the menus unavailable in Emperor?
-
Why is my Start button greyed out in Emperor software?
-
Why is there a speed accuracy range quoted?